DWYER PMS系列粉塵濃度傳感器

簡要描述：

產品名稱： DWYER PMS系列粉塵濃度傳感器所屬類別：環(huán)保除塵系列 - DWYER粉塵濃度產品所屬品牌： DWYER

更新時間：2023-03-05

訪問量：2319

廠商性質：代理商

生產地址：

在線詢價聯(lián)系我們

產品介紹：

產品名稱：

DWYER PMS系列粉塵濃度傳感器

所屬類別：

環(huán)保除塵系列 - DWYER粉塵濃度產品

所屬品牌：

DWYER

DWYER PMS系列粉塵濃度傳感器詳細信息：

產品名稱: PMS系列粉塵濃度傳感器
產品型號: PMS

和DPM監(jiān)控儀表配套使用

Service: Air and compatible gases, any type particulate.
Wetted Materials: 304SS and PTFE.
Minimum Detection: 5.0 pA.
Temperature Limits: Ambient: Maximum -40 to 392°F （-40 to 200°C）（Maximum must be calculated for each application）.
Process: See Model Chart on Ordering Page.
Pressure Limits: Standard: Full vacuum to 10 psi （0.69 bar）; Optional: 100 psi （6.89 bar）.
Output Signal: pA.
Electrical Connection: Low noise coaxial.
Process Connection: See Model Chart on Ordering Page.
Enclosure: Standard: Painted cast aluminum, Weatherproof, NEMA 4X; Optional: Intrinsically Safe, CSA.
Weight: Varies depending on length of probe and type of mount.
Agency Approvals: CE, CSA.

選型表

Example	PMS	A1	1	T1	P1	L1.5	PMS-A1P1T1P1-L1.5 Particulate Sensor, weatherproof, NEMA 4X, 1/2" NPT connection, 250°F max. temp., 10 psi max. pressure, 1.5" probe.
Series Designator	PMS						PMS Particulate Sensor
Enclosure Rating		A1 AHZ1					Weatherproof, NEMA 4X Intrinsically Safe, CSA & CE Approvals, Class I, II and III, Divisions I & II, All Groups, NEMA 4X （requires sanitary connection or flange mount）.
Process Connection			1 2 3 4				1/2" NPT 1.5" Sanitary Connection 2" 150# ANSI Flange 2" 150# ANSI Flange with Process Mating Flange and Installation Kit.
Maximum Process Temperature				T1 T2 T3 T4			250°F （121°C） 450°F （232°C） 800°F （426°C） -requires flange mount 1200°F （649°C） - requires flange mount
Maximum Process Pressure					P1 P2		10 psi 100 psi - requires flange mount
Insertion Length （recommended at least 1/2 duct diameter）						L1.5 L03 L05 L10 L15 L20 L30 L36 L48 L60 L72	1.5" Probe 3" Probe 5" Probe 10" Probe 15" Probe 20" Probe 30" Probe 36" Probe 48" Probe 60" Probe 72" Probe